I used the SkyBox to create the sky:
1:The picture I used is 512*512, include five pictures(front, back, right, left, top)
2:The SkyBox size is 1024.(because I see "The box will extend in all directions by half the size when viewed from the center");
but my sky become deformed around these edges of pictures. why...?
And there is another question...
I want to make a sence, and I will create the sence in my 3dmax,and then,export each of the model as 3ds file in the sence to jpct-ae,and then every model is located in the right place,is that right...?
thanks..
Either you can set Config.farPlane = 2000; or reduce size of skybox and clear z-buffer by fb.clearZBufferOnly();