Author Topic: Troubles with rotation matrix  (Read 3403 times)

Offline rtSJ

  • byte
  • *
  • Posts: 21
    • View Profile
Troubles with rotation matrix
« on: May 16, 2014, 02:06:32 pm »
Hello everyone !

I write it today because I have a problem with the orientation of a jPCT camera. I use the sensor of the device to do augmented reality. I use this tutorial to get the differents values [http://www.thousand-thoughts.com/2012/03/android-sensor-fusion-tutorial/] (Because the easy way is too noisy). I get a rotation matrix and 3 angles (Pitch, roll and Azimuth).

So I want to use the 3 angles with a simple rotateCameraAxis. But I can't because the 3 values ar not independant and when I rotate on 1 axis, others moves and I can't rotate for the 2 others. (I you have a solution, say it, I'm happy to read it !)

The second way to rotate the camera is to use the rotation matrix. I convert it to a 4x4 matrix and fill with 0 and one 1, I base it on cols. But it don't work. And more, my view is totally deformed. My modles are very stranges... Anyone have a solution about it ?

How can I use the 3 angles or the matrix to rotate my camera ?

Thanks ! :)
« Last Edit: May 23, 2014, 09:34:33 am by rtSJ »

Offline Aksiom

  • byte
  • *
  • Posts: 3
    • View Profile
Re: Troubles with rotation matrix
« Reply #1 on: May 16, 2014, 02:12:05 pm »
Hi if I get it right you may want t oread my question on StackOverflow.

http://stackoverflow.com/questions/23683150/rotation-vector-sensor-reverse-the-horizontal-rotation

I have found a solution to my question but I couldnt answer it yet because StackOverflow is in read only mode today. So if this is what you are looking for then let me know I will write the solution here.

Hope it helps.

Offline rtSJ

  • byte
  • *
  • Posts: 21
    • View Profile
Re: Troubles with rotation matrix
« Reply #2 on: May 16, 2014, 02:45:22 pm »
Thanks for your answer, but it's not what I look for... Sorry ^^'

Offline EgonOlsen

  • Administrator
  • quad
  • *****
  • Posts: 12295
    • View Profile
    • http://www.jpct.net
Re: Troubles with rotation matrix
« Reply #3 on: May 18, 2014, 02:34:06 pm »
The best approach is to use the rotation matrix. Keep jPCT's coordinate system in mind: http://www.jpct.net/wiki/index.php/Coordinate_system as well as the fact that jPCT's matrices are row major.

« Last Edit: May 19, 2014, 02:06:13 pm by EgonOlsen »

Offline rtSJ

  • byte
  • *
  • Posts: 21
    • View Profile
Re: Troubles with rotation matrix
« Reply #4 on: May 19, 2014, 01:52:07 pm »
Okay, I understand but what is weird is when I apply ma matrix on my camera, the view is deformed. And the camera is not oriented correctly, I'm sur.

When I get the matrix data, I transform it to a 4x4 matrix and I dump to the matrix of the camera :

Code: [Select]
gyroMatrix = getRotationMatrixFromOrientation(fusedOrientation);
                       
float[] arr4x4 = new float[16];
           
for(int i = 0; i < 9; i++){
    arr4x4[i] = gyroMatrix[i];
}
arr4x4[3] = 0;
arr4x4[7] = 0;
arr4x4[11] = 0;
arr4x4[12] = 0;
arr4x4[13] = 0;
arr4x4[14] = 0;
arr4x4[15] = 1;
           
scene.xyzMatrix.setDump(arr4x4);

And in my cycle of rendering I update the camera with :

Code: [Select]
Camera worldcam = world.getCamera();

worldcam.setBack(xyzMatrix);

I don't understand what I doing wrong because I think I do everything good...

Offline EgonOlsen

  • Administrator
  • quad
  • *****
  • Posts: 12295
    • View Profile
    • http://www.jpct.net
Re: Troubles with rotation matrix
« Reply #5 on: May 19, 2014, 02:13:40 pm »
... I think I do everything good...
No, you don't...apart from different coordinate systems and the missing conversion between them, your matrix filling is wrong. You copy the 9 elements of the source matrix into the first 9 elements of the target matrix, but it should actually be
  • =[0], [1]=[1], [2]=[2], [4]=[3]...your code ignores the fact that the last row and column in the target matrix are not present in the source matrix.

Offline rtSJ

  • byte
  • *
  • Posts: 21
    • View Profile
Re: Troubles with rotation matrix
« Reply #6 on: May 19, 2014, 03:47:08 pm »
Okay, okay It's my fault, I'm sorry. It's work quite well. Thank you ! I'm not very familiar with the 3D mathematics.

Concerning the different coordinate systems and the conversion between them, I make a rotation of the matrix with this line of code :

Code: [Select]
rotationMatrix = matrixMultiplication(rotationMatrix, myXDegRotationMatrix);
But I'm not sur of what matrix I'm suppose to use. I try to do a rotation of 180 degree with :

Code: [Select]
my180DegRotationMatrix[0] = 1.0f; my180DegRotationMatrix[1] = 0.0f; my180DegRotationMatrix[2] = 0.0f;
my180DegRotationMatrix[3] = 0.0f; my180DegRotationMatrix[4] = -1.0f; my180DegRotationMatrix[5] = 0.0f;
my180DegRotationMatrix[6] = 0.0f; my180DegRotationMatrix[7] = 0.0f; my180DegRotationMatrix[8] = -1.0f;

And a rotation of 90 degree anti-clockwise :

Code: [Select]
my90DegRotationMatrix[0] = 1.0f; my90DegRotationMatrix[1] = 0.0f; my90DegRotationMatrix[2] = 0.0f;
my90DegRotationMatrix[3] = 0.0f; my90DegRotationMatrix[4] = 0.0f; my90DegRotationMatrix[5] = 1.0f;
my90DegRotationMatrix[6] = 0.0f; my90DegRotationMatrix[7] = -1.0f; my90DegRotationMatrix[8] = 0.0f;

But that didn't works

Offline EgonOlsen

  • Administrator
  • quad
  • *****
  • Posts: 12295
    • View Profile
    • http://www.jpct.net
Re: Troubles with rotation matrix
« Reply #7 on: May 20, 2014, 03:39:46 pm »
Don't create your own matrices to do a rotation. Just rotate around X (for example) with PI, PI/2...whatever you need...