www.jpct.net

jPCT-AE - a 3d engine for Android => Support => Topic started by: AceGIS on October 07, 2016, 05:04:46 am

Title: Laser Alps MID-782 Android 4.4.2
Post by: AceGIS on October 07, 2016, 05:04:46 am

Hi All,

Has anybody tested a JCPT-AE app on the Laser Alps MID-782? I have an AR project which works great on my Samsung Galaxy S24G, however when testing the device on the Laser tablet, I simply get a grey screen? No errors or anything that stands out in the log? Not sure where else to start looking?

Ace

Title: Re: Laser Alps MID-782 Android 4.4.2
Post by: EgonOlsen on October 07, 2016, 10:24:58 am

Which OpenGL version are you using? ES 1.x or 2.0?
And which GPU does this device use? A quick search from me didn't really help to find out.

Title: Re: Laser Alps MID-782 Android 4.4.2
Post by: AceGIS on October 10, 2016, 02:30:13 am

Hi Ergon,

OpenGL ES 2.0
Mali 450

Thanks
Ace

Title: Re: Laser Alps MID-782 Android 4.4.2
Post by: EgonOlsen on October 10, 2016, 07:45:45 am

Sounds pretty standard...everything else that you doing, that's special? Like a wallpaper app or camera integration or something similar? Are you using there latest version if jPCT-AE?

Title: Re: Laser Alps MID-782 Android 4.4.2
Post by: AceGIS on November 14, 2016, 11:58:15 pm

Hi Ergon,

Nothing new in my app. I have had the app running very well on Samsung and Sony devices? It seems to be only this cheap little Laser tablet that is having issues..?

I'll keep investigating..

Ace

Title: Re: Laser Alps MID-782 Android 4.4.2
Post by: EgonOlsen on November 15, 2016, 08:30:46 am

You could set the Logger to debug and Config.glDebug to 1 (before creating the frame buffer) and see what that prints out (if anything).

Title: Re: Laser Alps MID-782 Android 4.4.2
Post by: AceGIS on November 17, 2016, 01:05:37 am

Hi Ergon,

I enabled the Config.glDebugLevel but can't see any problems..?? I have attached a screen capture so you can see the issue..

Ace

Title: Re: Laser Alps MID-782 Android 4.4.2
Post by: EgonOlsen on November 17, 2016, 08:34:44 pm

Can you upload the log's output?